xx
domingo, 17 de abril de 2011
sábado, 16 de abril de 2011
Decking - Outside Flooring and furniture
These materials resist to any kind of weather and can be installed unfinished which will turn grey by aging or can be sealed every two years* (depending on the sealant) and keep their natural color.
Available species:
Ipe
Massaranduba
Cumaru*
Garapa*
Available sizes:
¾" x 5.5" x 8' to 20'
¾" x 3.5" x 8' to 20'
1"x 5.5" x 8' to 20'
1 x 3.5" x 8' to 20'
*From 8' to 18' KD 14-16%
Solid Wood Flooring
Species:
Specifications:
Thickness: ¾" - 19mm
Widths: 2 ¼"; 3"; 3 ¼"; 4" and 5" - 57.15mm; 76.20mm; 82.55mm; 101.60mm and 127mm
Length: 1' to 7' long with 3' to 3.5' average - 304.80mm up to 2,133.60mm with 914.40mm to 1,066.80mm average
Moisture Content: 6-8% to USA and 10-12% to Panama
Profile: Square edge unfinished or Micro bevel 2 and 4 sides unfinished and prefinished inside boxes.
Quality:
Clear Grade / A grade - without any defects or color variation
Sel&Bet / B grade - allows color variation (this represents about 90% of the loads) and torn grain, sander mark, small spots of sapwood without holes and very small pinholes (up to 1/16"- 2mm diameter) as well as sander defects and small (less than 2") cracks on the bottom of the piece. None of the boards shall have face cracks, twisted or cupping problems as well as moisture content and milling defects.
| Jatobá Braz Cherry | Cumaru Braz Teak | Muiracatiara Tigerwood | Muirapiranga Bloodwood | Ipe Braz Walnut |
| Sucupira Southen Chestnut | Tauari Braz Oak Blonde Cherry | Tamarindo Cherry Light Braz Rosewood |
Specifications:
Thickness: ¾" - 19mm
Widths: 2 ¼"; 3"; 3 ¼"; 4" and 5" - 57.15mm; 76.20mm; 82.55mm; 101.60mm and 127mm
Length: 1' to 7' long with 3' to 3.5' average - 304.80mm up to 2,133.60mm with 914.40mm to 1,066.80mm average
Moisture Content: 6-8% to USA and 10-12% to Panama
Profile: Square edge unfinished or Micro bevel 2 and 4 sides unfinished and prefinished inside boxes.
Quality:
Clear Grade / A grade - without any defects or color variation
Sel&Bet / B grade - allows color variation (this represents about 90% of the loads) and torn grain, sander mark, small spots of sapwood without holes and very small pinholes (up to 1/16"- 2mm diameter) as well as sander defects and small (less than 2") cracks on the bottom of the piece. None of the boards shall have face cracks, twisted or cupping problems as well as moisture content and milling defects.
Assinar:
Postagens (Atom)





